Coordinated Revit models, clash-checked in Navisworks. Architecture, structure and MEP, in one model your team can open, edit and submit.
Each level is its own 7-day production, from the drawings you already have. Tap a level and the model gains detail in front of you.
What each level starts from, what is modelled, how it is checked, and the files you receive. Every level is a 7-day production.
| LOD 100Concept | LOD 200Schematic | LOD 350Coordinated | LOD 400Fabrication | LOD 500As-built | |
|---|---|---|---|---|---|
| Starts from | Concept sketches and design | SD package | IFC drawings | IFC drawings + approved submittals | Verified site data |
| What's modelled | Massing, areas and volumes, with levels and grids | Walls, slabs and structure at approximate size; generic MEP systems | Full architecture, structure and MEP: ducts, pipes, cable trays and equipment with connections and clearances | Fabrication detail: rebar, fittings, hangers and supports | As-built record model of what was built |
| Checked | Areas and volumes | Coordination review between disciplines | Navisworks clash detection, rerouted and re-checked to zero | Clash check at fabrication detail | Model checked against site data |
| You receive | RVTIFCPDFMassing model, area and volume schedule | RVTDWGPDFIFCNWCModel, plans and sections | RVTRFADWGPDFNWC/NWDIFCPlus clash report and change log | RVTRFADWGPDFNWC/NWDIFCPlus clash report and change log | RVTDWGPDFIFCNWDRecord model and as-built set |
| Used for | Feasibility, area checks, early cost | Design development and early coordination | Coordination, shop-drawing base, tender quantities | Fabrication and installation | Handover and facility management |
| Turnaround | 7 days | 7 days | 7 days | 7 days | 7 days |
Send your drawingsSketches, SD package, IFC set, DWG, PDF or RVT.
We build the modelIn licensed Revit, to the LOD you choose.
We check and fix clashesNavisworks finds them. The AETRAA platform reroutes them.
You receive the filesModel, drawings, Navisworks files and reports.
Built in licensed industry software. Send us sketches, an SD package, an IFC set, DWG, PDF or RVT; you receive the files below.
.RVT project models per discipline · .RFA families
.DWG plans, sections, elevations and details
.NWC discipline caches · .NWD federated model
.IFC for any BIM software, and for facility management
.PDF sheet sets, ready to issue
Every clash found, every reroute: what moved and why
Navisworks finds every clash. The AETRAA platform reroutes it within the rules. The change report says what moved and why, and the re-check confirms zero.
One fixed turnaround, whatever the level.
Revit, AutoCAD and Navisworks.
Reroute reports show what moved and why.
Architecture, structure and MEP in one coordinated model.
Send the drawings you have. Tell us the LOD. Seven days later, the files are yours.